RV Repair Winter Garden provides mobile rv shore power repair throughout Orange, Lake, and Osceola counties. Our certified technician comes to your wherever your RV is parked. Flat-rate pricing quoted before we start - no towing required.
Our certified mobile technicians provide rv shore power repair throughout Winter Garden and all of Orange, Lake, and Osceola counties. We come to your wherever your RV is parked - no towing, no shop drop-off required.
Feat Ac Repair in Winter Garden, FLFeat Slide Out in Winter Garden, FL
Flat-rate pricing is given before any work begins. You approve the price, we do the work. Available 7 days a week, 7 AM to 8 PM.
Shore power inlet repair - replacing a burned receptacle, connector, or power cord - runs $95 to $325 on a mobile call. A 30-amp inlet replacement is $125 to $225; a 50-amp inlet is $175 to $295. Burned connections from a bad pedestal connection are very common in Florida's humid environment.
A warm power cord indicates a high-resistance connection at either the pedestal end or the RV inlet. Heat is generated by current flowing through a corroded or loose contact.
A hot cord is a fire risk - unplug and have both the cord ends and the RV inlet inspected before reconnecting. Burned plastic smell from the inlet is an emergency.
Check in this order: campground pedestal breaker (look for a tripped breaker at the pedestal box), your power cord for visible damage or loose connection at both ends, the 30-amp or 50-amp inlet on the RV for signs of burning, and your RV's main breaker. Use a non-contact voltage tester at the pedestal outlet to confirm the campground is actually providing power.
A power line conditioner monitors incoming voltage and disconnects automatically if it falls below about 104V or rises above 132V - both of which can damage RV appliances. Florida campgrounds, especially older parks, can have weak or dirty power. A surge protector/EMS unit like Progressive Industries HW30C or HW50C is a worthwhile investment for frequent campers.
Yes - a 50-amp to 30-amp dog-bone adapter allows a 50-amp RV to plug into a 30-amp pedestal safely. You are limited to 30 amps total (about 3,600 watts), so running both air conditioners simultaneously will trip the breaker. This is a standard adaptation with no safety concerns as long as the adapter is high-quality.
Loose engagement between the plug prongs and the campground outlet receptacle creates electrical arcing over time, which oxidizes and burns the metal contacts. Campground outlets age and lose their spring tension, making the problem worse. A burned inlet should be replaced - it won't self-correct and gets progressively worse.
An immediate trip on plugging in indicates either a dead short in the RV's wiring, a failed converter drawing excessive current, or the campground outlet is miswired or has reverse polarity. Use a circuit analyzer (a $12 device) in the pedestal outlet to check polarity before plugging in - reverse polarity will trip a reverse-polarity-protected surge protector.
Use a plug-in outlet tester or power analyzer at the campground pedestal before connecting your RV. These devices check for correct wiring, proper ground, and no open neutral.
Progressive Industries, Southwire, and Hughes units include voltage readout. An open ground or reverse polarity at the campground is a risk to RV electronics and should be reported to the camp host.
Yes - voltage sags from a loose shore power connection cause refrigerator compressors to overheat and burn out prematurely. Modern 12V compressor refrigerators and absorption refrigerators are particularly sensitive to voltage quality. An EMS surge protector that disconnects during voltage sag protects all appliances simultaneously.
For 30-amp RV service: minimum 10-gauge wire, rated for outdoor use. For 50-amp service: minimum 6-gauge.
Never use a standard household extension cord - they are undersized and will overheat. RV-specific extension cords are available in 10-foot, 25-foot, and 50-foot lengths and are built to handle continuous 30-amp or 50-amp draw.
FAQ
Common Questions
Shore power inlet repair - replacing a burned receptacle, connector, or power cord - runs $95 to $325 on a mobile call. A 30-amp inlet replacement is $125 to $225; a 50-amp inlet is $175 to $295. Burned connections from a bad pedestal connection are very common in Florida's humid environment.
A warm power cord indicates a high-resistance connection at either the pedestal end or the RV inlet. Heat is generated by current flowing through a corroded or loose contact.
A hot cord is a fire risk - unplug and have both the cord ends and the RV inlet inspected before reconnecting. Burned plastic smell from the inlet is an emergency.
Check in this order: campground pedestal breaker (look for a tripped breaker at the pedestal box), your power cord for visible damage or loose connection at both ends, the 30-amp or 50-amp inlet on the RV for signs of burning, and your RV's main breaker. Use a non-contact voltage tester at the pedestal outlet to confirm the campground is actually providing power.
A power line conditioner monitors incoming voltage and disconnects automatically if it falls below about 104V or rises above 132V - both of which can damage RV appliances. Florida campgrounds, especially older parks, can have weak or dirty power. A surge protector/EMS unit like Progressive Industries HW30C or HW50C is a worthwhile investment for frequent campers.
Yes - a 50-amp to 30-amp dog-bone adapter allows a 50-amp RV to plug into a 30-amp pedestal safely. You are limited to 30 amps total (about 3,600 watts), so running both air conditioners simultaneously will trip the breaker. This is a standard adaptation with no safety concerns as long as the adapter is high-quality.
Loose engagement between the plug prongs and the campground outlet receptacle creates electrical arcing over time, which oxidizes and burns the metal contacts. Campground outlets age and lose their spring tension, making the problem worse. A burned inlet should be replaced - it won't self-correct and gets progressively worse.
An immediate trip on plugging in indicates either a dead short in the RV's wiring, a failed converter drawing excessive current, or the campground outlet is miswired or has reverse polarity. Use a circuit analyzer (a $12 device) in the pedestal outlet to check polarity before plugging in - reverse polarity will trip a reverse-polarity-protected surge protector.
Use a plug-in outlet tester or power analyzer at the campground pedestal before connecting your RV. These devices check for correct wiring, proper ground, and no open neutral.
Progressive Industries, Southwire, and Hughes units include voltage readout. An open ground or reverse polarity at the campground is a risk to RV electronics and should be reported to the camp host.
Yes - voltage sags from a loose shore power connection cause refrigerator compressors to overheat and burn out prematurely. Modern 12V compressor refrigerators and absorption refrigerators are particularly sensitive to voltage quality. An EMS surge protector that disconnects during voltage sag protects all appliances simultaneously.
For 30-amp RV service: minimum 10-gauge wire, rated for outdoor use. For 50-amp service: minimum 6-gauge.
Never use a standard household extension cord - they are undersized and will overheat. RV-specific extension cords are available in 10-foot, 25-foot, and 50-foot lengths and are built to handle continuous 30-amp or 50-amp draw.
RV Problem? We Come to You.
Same-day service across Winter Garden and all of Central Florida. Guaranteed flat-rate pricing before we start.