RV Repair Winter Garden provides mobile rv solar system diagnosis throughout Orange, Lake, and Osceola counties. Our certified technician comes to your wherever your RV is parked. Flat-rate pricing quoted before we start - no towing required.
Our certified mobile technicians provide rv solar system diagnosis throughout Winter Garden and all of Orange, Lake, and Osceola counties. We come to your wherever your RV is parked - no towing, no shop drop-off required.
Feat Ac Repair in Winter Garden, FLFeat Slide Out in Winter Garden, FL
Flat-rate pricing is given before any work begins. You approve the price, we do the work. Available 7 days a week, 7 AM to 8 PM.
1Call us with the details. Tell us about the rv solar system diagnosis issue and where your RV is located. We provide a flat-rate quote over the phone.
2Tech dispatched to your location. A certified technician drives to your wherever your RV is parked with the tools and parts needed.
3Repaired on-site, same day. Most rv solar system diagnosis jobs are completed in a single visit. No waiting, no shop drop-off, no towing fees.
4Pay only what was quoted. The price you approved upfront is the price you pay. No surprise charges after the fact.
Solar system diagnosis runs $85 to $145 on a mobile call. This includes panel output testing, charge controller input and output verification, battery connection and BMS testing, and a written findings report with repair recommendations.
Test the open-circuit voltage at the panels on the roof (should be 18 to 22V per 12V panel in full sun). Then test voltage at the charge controller's panel input terminals.
If voltage drops between roof and controller, the problem is wiring or MC4 connectors. If voltage is normal at the controller input but no output current, the controller has failed.
A solar system that stops mid-day while still in sun is likely overheating - the charge controller and batteries reach high temperature in Florida's midday heat and the controller throttles back to protect them. Ensure the charge controller is in a ventilated location. If the system stops at the same time regardless of cloud cover, overtemperature is the cause.
Panel input: 18 to 22V per panel (or combined string voltage). Charging current: 5 amps per 100W of panels in good sun.
Battery voltage: climbing from resting level toward absorption voltage (14.4 to 14.6V for LiFePO4, 14.2 to 14.4V for AGM). If any of these readings are absent, that branch of the system needs diagnosis.
Disconnect the panels from the charge controller. Measure open-circuit voltage with a multimeter: a healthy 100W 12V nominal panel produces 18 to 21V OCV in full sun.
Measure short-circuit current with a clamp meter: the same panel produces 5 to 6 amps ISC. Panels below 80% of spec need inspection for shading, glass delamination, or cell damage.
If panel voltage is present at the controller but charging amps read zero, the controller is receiving input but not converting it. Possible causes: the controller's low-temperature protection is active (battery temperature sensor reading too cold - unusual in Florida), the battery voltage is already at float level (system working correctly - battery is full), or an internal controller fault has disabled the charging circuit.
Yes - moisture at MC4 connector joints (particularly roof-to-cable entry) is the leading humidity-related failure in Florida RV solar systems. Corroded MC4 pins create resistance that reduces current and can arc, creating a fire risk. We inspect MC4 connections at every solar diagnostic call and clean or replace corroded connectors.
Renogy E03 indicates a battery over-voltage fault - the controller measured battery voltage above the protection threshold. This can be caused by a failing battery with a bad cell, another charging source (converter or shore power) conflicting with the solar controller's charging, or a controller calibration error. Verify with a separate multimeter at the battery terminals.
Yes - any shading on panels reduces output, and AC units on RV roofs commonly cast partial shadows on nearby panels between late morning and early afternoon. Good panel placement during installation accounts for this - panels should be positioned to minimize AC shadow overlap during peak production hours (10 AM to 2 PM solar time).
Track daily energy production (most MPPT controllers display cumulative watt-hours). In Central Florida, a 100W panel should produce 450 to 600 watt-hours on a clear summer day. Consistent production below 350 watt-hours per panel per day in summer indicates a system problem worth investigating: dirty panels, shading, corroded connections, or controller inefficiency.
FAQ
Common Questions
Solar system diagnosis runs $85 to $145 on a mobile call. This includes panel output testing, charge controller input and output verification, battery connection and BMS testing, and a written findings report with repair recommendations.
Test the open-circuit voltage at the panels on the roof (should be 18 to 22V per 12V panel in full sun). Then test voltage at the charge controller's panel input terminals.
If voltage drops between roof and controller, the problem is wiring or MC4 connectors. If voltage is normal at the controller input but no output current, the controller has failed.
A solar system that stops mid-day while still in sun is likely overheating - the charge controller and batteries reach high temperature in Florida's midday heat and the controller throttles back to protect them. Ensure the charge controller is in a ventilated location. If the system stops at the same time regardless of cloud cover, overtemperature is the cause.
Panel input: 18 to 22V per panel (or combined string voltage). Charging current: 5 amps per 100W of panels in good sun.
Battery voltage: climbing from resting level toward absorption voltage (14.4 to 14.6V for LiFePO4, 14.2 to 14.4V for AGM). If any of these readings are absent, that branch of the system needs diagnosis.
Disconnect the panels from the charge controller. Measure open-circuit voltage with a multimeter: a healthy 100W 12V nominal panel produces 18 to 21V OCV in full sun.
Measure short-circuit current with a clamp meter: the same panel produces 5 to 6 amps ISC. Panels below 80% of spec need inspection for shading, glass delamination, or cell damage.
If panel voltage is present at the controller but charging amps read zero, the controller is receiving input but not converting it. Possible causes: the controller's low-temperature protection is active (battery temperature sensor reading too cold - unusual in Florida), the battery voltage is already at float level (system working correctly - battery is full), or an internal controller fault has disabled the charging circuit.
Yes - moisture at MC4 connector joints (particularly roof-to-cable entry) is the leading humidity-related failure in Florida RV solar systems. Corroded MC4 pins create resistance that reduces current and can arc, creating a fire risk. We inspect MC4 connections at every solar diagnostic call and clean or replace corroded connectors.
Renogy E03 indicates a battery over-voltage fault - the controller measured battery voltage above the protection threshold. This can be caused by a failing battery with a bad cell, another charging source (converter or shore power) conflicting with the solar controller's charging, or a controller calibration error. Verify with a separate multimeter at the battery terminals.
Yes - any shading on panels reduces output, and AC units on RV roofs commonly cast partial shadows on nearby panels between late morning and early afternoon. Good panel placement during installation accounts for this - panels should be positioned to minimize AC shadow overlap during peak production hours (10 AM to 2 PM solar time).
Track daily energy production (most MPPT controllers display cumulative watt-hours). In Central Florida, a 100W panel should produce 450 to 600 watt-hours on a clear summer day. Consistent production below 350 watt-hours per panel per day in summer indicates a system problem worth investigating: dirty panels, shading, corroded connections, or controller inefficiency.
RV Problem? We Come to You.
Same-day service across Winter Garden and all of Central Florida. Guaranteed flat-rate pricing before we start.